Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
695Hospitality
17
Digit to Insert/Delete
Enter the leading digit that may be deleted and inserted back as described in the
following text. The current PMS message set uses the extension number as the
room identifier. In many customer configurations, the leading digit of the
extension number is dropped to screen the room number. In order to accommodate
PMS devices that are based on room number and not extension, this leading digit
may be deleted on messages from the switch to the PMS, and then inserted back
on messages from the PMS.
NOTE:
The PMS interface supports 3-, 4-, or 5-digit extensions, but prefixed
extensions do not send the entire number across the interface. Only the
assigned extension number is sent. Therefore, you should not use prefixed
extensions for numbers that are also going to use the Digit to Insert/Delete
function.
Field descriptions for page 3
Hospitality screen
Definition for Rooms in State 1 - 6
Enter up to a 30-character definition for each room status. For example, you could
define state 1 as ‘clean, ready to use’ and state 2 as ‘occupied, needs cleaning.’
Valid entries Usage
0
to 9
Page 3 of 3
HOSPITALITY
ROOM STATES:
Definition for Rooms in State 1: Rooms in State 1
Definition for Rooms in State 2: Rooms in State 2
Definition for Rooms in State 3: Rooms in State 3
Definition for Rooms in State 4: Rooms in State 4
Definition for Rooms in State 5: Rooms in State 5
Definition for Rooms in State 6: Rooms in State 6
HOSPITALITY FEATURES
Suite Check-in? n