Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1327Extended User Administration of Redirected Calls
20
Emergency Transfer panels are available in multiples of five telephones, which
may be pulse-dialing or touch-tone phones. You must use pulse dialing if the CO
accepts dial pulses only. Each telephone can be connected to a separate CO.
When your system is not in Emergency Transfer mode, transfer phones can be
used as regular telephone.
Interactions
■ Night Service
If a power failure occurs when the system is in night service, the system
automatically returns to night service when power returns.
Extended User Administration of
Redirected Calls
Extended User Administration of Redirected Calls allows you to change your
lead-coverage path or your call forwarding from any local (on-site) or remote
(off-site) location.
!
SECURITY ALERT:
Invalid extensions and invalid station security codes are logged as security
violations. The extension or incoming trunk from which the command
sequence was dialed, the Feature Access Code (FAC), and the dialed
command string appear on the Monitor Security-Violations Station Security
Codes screen or report if Security Violation Notification is enabled.
For administration information about tracking security violations, refer to
‘‘
Setting up security violations notification’’ on page 328.
Detailed description
This feature does not change Call Coverage, nor does it change Call Forwarding
All Calls or the Call Forwarding Busy/Don’t Answer. It merely allows you to
select between one of two previously administered coverage paths or to change
your forwarding from any on-site or off-site location.
Telecommuting access extension
The telecommuting access extension allows you to use Extended User
Administration of Redirected Calls from off-site. If you want to quickly disable
the feature for all users, change the Telecommuting Access Extension to blank.