Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1012Trunk Group
17
Outgoing Dial Guard (msec)
Incoming Glare Guard (msec)
This field only appears when the trunk group Direction field is
two-way.
Outgoing Glare Guard (msec)
This field only appears for
outgoing and two-way trunk groups.
Outgoing Rotary Dial Interdigit (msec)
This field only appears when: (1) the trunk group Group Type field is
access,
aplt, co, diod, dmi-bos, fx, rlt, tandem, or wats and the Outgoing Dial Type
field is
rotary, (2) the Group Type field is tie, the Trunk Signaling Type field is
blank,
cont, or dis, and the Outgoing Dial Type field is rotary, or (3) the Group
Type field is
tie, and the Trunk Signaling Type field is tge, tgi, or tru (the
Outgoing Dial Type field does not appear but is implied to be
rotary).
Valid entries Usage
100
to 25500 in
increments of
100
Enter the minimum interval between seizure acknowledgment
of a trunk and the outpulsing of digits. This field cannot be
blank. For trunks that do not provide seizure acknowledgment,
the timer specifies the minimum time between seizure and the
outpulsing of digits. Any digit the caller dials after they lift the
receiver, but before the timer expires, is not outpulsed until the
timer expires.
Valid entries Usage
100
to 25500 in
increments of
100
Enter the minimum interval that must elapse between a trunk’s
release from an incoming call and its seizure for an outgoing
call. This field cannot be blank. This delay gives the far-end
time to release all equipment after the trunk is released.
Valid entries Usage
100
to 25500 in
increments of
100
Enter the minimum interval that must elapse between a trunk’s
release from an outgoing call and its seizure for another
outgoing call. This field cannot be blank. This delay gives the
far-end time to release all equipment after the outgoing trunk is
released.
Valid entries Usage
150
to 2550 in
increments of
10
Enter the minimum time between outpulsed digits on outgoing
rotary trunks.