Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
556Crisis Alert System Parameters
17
Field description
Every User Responds
Controls who needs to respond to a crisis alert.
Alert Pager
Originating Extension
Used as the extension originating the call to send a crisis alert message to a pager.
Displays when the Alert Pager field is
y. This field requires an entry before
submitting the screen.
Crisis Alert Code
Displays when the Alert Pager field is
y. This field requires an entry before
submitting the screen.
Valid entries Usage
y
If set to y, all users who have a crisis alert button are notified
and must clear the alert for every emergency alert. Assign crisis
alert buttons only to attendant consoles and stations that must
be notified of an emergency call.
n If set to n, all users are notified, but only one user needs to
acknowledge an alert. This user may be the attendant or any
other digital telephone with a crisis alert button. When the alert
is acknowledged by one user, the alert is cleared at all stations
except the one that acknowledged the alert.
Valid entries Usage
y/n
Enter
y
to use Crisis Alert to a Digital Pager.
Valid entries Usage
1 - 5 digits Requires a valid unassigned extension according to the dial
plan.
Valid entries Usage
1 - 3 digits The numbers in this field are the first 3 digits in the crisis alert
pager message. Lucent recommends you enter the numbers
used to call the local emergency service or any digits used for
an emergency situation (for example, 911).