Filter
Top Products
31-18
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 31 Managing Dynamic Access Policies for Remote Access VPNs (ASA 8.0+ Devices)
Dynamic Access Page (ASA)
Port Forwarding Select an option for the port forwarding lists that apply to this DAP
record:
• Unchanged—Removes the attributes from the running
configuration.
• Enable—Enables port forwarding on the device.
• Disable—Disables port forwarding on the device.
• Auto-start—Enables port forwarding, and to have the DAP record
automatically start the port forwarding applets associated with its
port forwarding lists.
Port Forwarding List The Port Forwarding List, that defines the mapping of the port number
on the client machine to the application’s IP address and port behind the
SSL VPN gateway.
You can click Select to open the Port Forwarding List Selector from
which you can select the required Port Forwarding List from a list of
Port Forwarding List objects. A Port Forwarding List object defines the
mappings of port numbers on the remote client to the application’s IP
address and port behind the SSL VPN gateway.
Bookmark tab—Lets you enable and configure SSL VPN bookmarks. When enabled, users who
successfully log into the SSL VPN are presented with the portal page containing the list of defined
bookmarks. These bookmarks enable users to access resources available on SSL VPN websites in
Clientless access mode.
Enable Bookmarks Specify the file server browsing setting to be configured on the portal
page:
• Unchanged—Uses values from the group policy that applies to
this session.
• Enable—Enables bookmarks on the SSL VPN portal page.
• Disable—Disables bookmarks on the SSL VPN portal page.
Bookmarks A list of websites that will be displayed on the portal page as a
bookmark to enable users to access the resources available on the SSL
VPN websites.
You can click Select to open the Bookmarks Selector from which you
can select the required bookmark from a list or create a new bookmark,
as desired.
Action tab—Specifies special processing to apply to a specific connection or session.
Terminate When selected, terminates the session. By default, the access policy
attributes are applied to the session and it is running.
Table 31-5 Add/Edit Dynamic Access Policy Dialog Box > Main Tab (Continued)
Element Description