Filter
Top Products
57-8
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 57 Configuring Security Contexts on Firewall Devices
Managing Security Contexts
Allocate Interfaces Dialog Box (PIX/ASA only)
The Allocate Interfaces dialog box lets you assign an interface, and optionally one or a range of related
subinterfaces, to a context, and set name-aliasing options.
Navigation Path
You access the Allocate Interfaces dialog box from the Add Security Context and Edit Security Context
dialog boxes. See Add/Edit Security Context Dialog Box (PIX/ASA), page 57-7 for more information.
Related Topics
• Managing Security Contexts, page 57-4
ScanSafe Settings To enable ScanSafe inspection in this context, select Enable ScanSafe
Web Security. To override the license specified in the system
configuration, enter a license ID in the License field; must be 32
hexadecimal characters. See Chapter 20, “Working with ScanSafe Web
Security” for more information.
Interfaces This table lists the interfaces and subinterfaces allocated to this context,
and their associated settings. These are the interfaces and subinterfaces
for which the security context will inspect traffic.
To add interfaces and subinterfaces to this context, click the Add Row
button below the table to open the Allocate Interfaces Dialog Box
(PIX/ASA only), page 57-8. You can allocate one or more interfaces,
and optionally with each interface, one or a range of subinterfaces.
To edit an allocation entry, select it and then click the Edit Row button
below the table to open the Edit Interface dialog box. Note that you can
edit only the Alias Name and the Show hardware properties option; you
cannot change the interface/subinterface assignments. Refer to
Allocate Interfaces Dialog Box (PIX/ASA only), page 57-8 for more
information about these options.
To remove an interface/subinterface allocation, select the appropriate
row in this table and then click the Delete Row button below the table.
Failover Group If this context is part of an active/active failover configuration, choose
the failover group to which this context belongs.
Management IP Address Enter or Select the IP address that Security Manager is to use for
communications with this security context.
Table 57-2 Add/Edit Security Context Dialog Box (PIX/ASA) (Continued)
Element Description