Filter
Top Products
48-11
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 48 Configuring Device Access Settings on Firewall Devices
Configuring SNMP
Entity MIB • Field Replaceable Unit Insert – A Field Replaceable Unit (FRU)
has been inserted, as indicated. (FRUs include assemblies such as
power supplies, fans, processor modules, interface modules, etc.)
• Field Replaceable Unit Remove – A Field Replaceable Unit
(FRU) has been removed, as indicated in the notification.
• Configuration Change – There has been a hardware change, as
indicated in the notification.
• Fan Failure – A device cooling fan has failed, as indicated in the
notification.
• CPU Temperature – Temperature of the central processing unit
has reached the configured limit.
• Power Supply Failure – A device power supply has failed, as
indicated in the notification.
• Redundancy Switchover – Switchover occurred for redundant
component, as indicated in the notification.
• Alarm Asserted – The condition described by the alarm exists.
• Alarm Cleared – The condition described by the alarm does not
exist.
Resource
• Connection Limit Reached – This trap indicates that a connection
attempt was rejected because the configured connections limit has
been reached.
• Resource Limit Reached – This notification is generated when the
configured resource limit is reached, as described in the
notification.
• Resource Rate Limit Reached – This notification is generated
when the configured resource rate limit is reached, as described in
the notification
Table 48-8 SNMP Trap Configuration Dialog Box (Continued)
Element Description