Filter
Top Products
62-6
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 62 Configuring Logging Policies
Logging on Cisco IOS Routers
Related Topics
• Logging on Cisco IOS Routers, page 62-1
• Defining NetFlow Parameters, page 62-6
• NetFlow Policy Page, page 62-12
Defining NetFlow Parameters
This procedure describes enabling NetFlow logging on the router.
Related Topics
• NetFlow on Cisco IOS Routers, page 62-5
• NetFlow Policy Page, page 62-12
• Logging on Cisco IOS Routers, page 62-1
Step 1 To access the router’s NetFlow page, do one of the following:
• (Device view) Select Platform > Logging > NetFlow from the Policy selector.
• (Policy view) Select Router Platform > Logging > NetFlow from the Policy Type selector. Select
an existing policy or create a new one.
The router’s NetFlow page is displayed. See NetFlow Policy Page, page 62-12 for complete descriptions
of the fields on this page.
Step 2 On the Setup tab of the NetFlow page, specify global NetFlow parameters for the router:
• Primary Destination – Choose IP Address or Hostname from this list to enable NetFlow collection
and to specify how the primary NetFlow collector will be defined. You can choose the blank entry
to disable this option.
–
IP Address – Enter the IP address of the device hosting the primary NetFlow Collection Engine,
and then enter the number of the UDP Port monitored by that flow collector (port numbers can
range from 1 to 65535)
–
Hostname – Enter the fully qualified domain name of the device hosting the primary NetFlow
Collection Engine, and then enter the number of the UDP Port monitored by that flow collector
(port numbers can range from 1 to 65535)
• Redundant Destination – Choose IP Address or Hostname from this list to specify how the back-up
NetFlow collector will be defined. You can choose the blank entry to disable this option.
–
IP Address – Enter the IP address of the device hosting the secondary NetFlow Collection
Engine, and then enter the number of the UDP Port monitored by that flow collector (port
numbers can range from 1 to 65535)
–
Hostname – Enter the fully qualified domain name of the device hosting the secondary NetFlow
Collection Engine, and then enter the number of the UDP Port monitored by that flow collector
(port numbers can range from 1 to 65535)
Note If you define a Primary and a Redundant Destination, flow data is transmitted to both.
• Source Interface – Specify the router interface through which flow data will be transmitted to the
collector destination(s).