Filter
Top Products
64-40
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 64 Configuring Routing Policies
OSPF Process Policy Page
Field Reference
Table 64-18 OSPF Redistribution Mapping Dialog Box
Element Description
Process ID The OSPF process into which other routes are being redistributed. You
must select a process ID number from the list of OSPF processes
defined in the OSPF Process Page—Setup Tab, page 64-35.
Protocol to Redistribute The routing protocol that is being redistributed:
• Static—Redistributes static routes. You can define a single
mapping for each route.
• EIGRP—Redistributes an EIGRP autonomous system. Enter the
AS number in the displayed field. You can define a single mapping
for each AS.
• BGP—Redistributes a BGP autonomous system. You can define a
single BGP mapping on each device. If you configured a BGP AS
in the BGP Setup tab, the AS number is displayed. Otherwise, a
message is displayed indicating that no BGP AS was defined. See
BGP Page—Redistribution Tab, page 64-6.
Protocol to Redistribute
(continued)
• OSPF—Redistributes a different OSPF process. You can define a
single mapping for each process. Select a process from the
displayed list, then select one or more match criteria:
–
Internal—Routes that are internal to a specific AS.
–
External1—Routes that are external to the AS and imported
into OSPF as a Type 1 external route.
–
External2—Routes that are external to the AS and imported
into the selected process as a Type 2 external route.
–
NSAAExternal1—Not-So-Stubby Area (NSSA) routes that
are external to the AS and imported into the selected process
as Type 1 external routes.
–
NSAAExternal2—(NSSA) routes that are external to the AS
and imported into the selected process as Type 2 external
routes.
• RIP—Redistributes RIP routes. You can define a single mapping
for each route.
• Connected—Redistributes routes that are established
automatically by virtue of having enabled IP on an interface. These
routes are redistributed as external to the AS.
Default Metric A value representing the cost of the redistributed route.
Metric Type The external link type that is associated with the route being
redistributed into the OSPF routing domain:
• 1—Type 1 external route. The metric is the sum of the external
redistributed cost and the internal OSPF cost.
• 2—Type 2 external route. The metric is equal to the external
redistributed cost, as defined in the Metric field. This is the default.