Filter
Top Products
59-76
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
PPP/MLP Policy Page
PPP Dialog Box
Use the PPP dialog box to configure PPP connections on the router. When you configure a PPP
connection, you can define the type of authentication and authorization to perform and define multilink
parameters.
Navigation Path
Go to the PPP/MLP Policy Page, page 59-75, then click the Add or Edit button beneath the table.
Related Topics
• Defining PPP Connections, page 59-71
Field Reference
Table 59-31 PPP Dialog Box
Element Description
Interface The interface on which PPP encapsulation is enabled. Enter the name
of an interface or interface role, or click Select to select it. If the object
that you want is not listed, click the Create button to create it.
The following interface types support PPP:
• Async
• Group-Async
• Serial
• High-Speed Serial Interface (HSSI)
• Dialer
• BRI, PRI (ISDN)
• Virtual template
• Multilink
You cannot define PPP on:
• Subinterfaces.
• Serial interfaces with Frame Relay encapsulation.
• Virtual template interfaces defined as Ethernet or tunnel types
(serial is supported).
Note You can define only one PPP connection per interface.
Note Deployment might fail if you define PPP on a virtual template
that is also used in an 802.1x policy. See 802.1x Policy Page,
page 61-5.
PPP tab Defines the type of authentication and authorization to perform on the
PPP connection. See PPP Dialog Box—PPP Tab, page 59-77.