Filter
Top Products
65-39
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
VLAN ACLs (VACLs)
Note The order in which you place the sequences is significant. When a flow matches a permit
ACL entry, the associated action is taken without checking the remaining sequences. When
a flow matches a deny ACL entry, it is checked against the next ACL in the same sequence
or the next sequence. If a flow does not match any ACL entry and at least one ACL is
configured for that packet type, the packet is denied.
Deleting VACLs
You can delete a VACL if it is not being used by any device, policy, or object.
Before You Begin
You must delete all references to the VACL before you can remove it from the database. To locate all
references to the VACL, run an object usage report for it. See Generating Object Usage Reports,
page 6-14.
Related Topics
• Creating or Editing VACLs, page 65-37
• Interfaces/VLANs Page—VLANs Tab, page 65-27
• VLAN ACLs (VACLs), page 65-36
Step 1 Do one of the following:
• (Device view) Select a Catalyst device, then select Platform > VLAN Access Lists from the Policy
selector.
• (Policy view) Select Catalyst Platform > VLAN Access Lists.
The VLAN Access Lists page is displayed. For a description of the fields on this page, see VLAN Access
Lists Page, page 65-39.
Step 2 Click in a row to select a VACL, then click Delete.
Step 3 Click OK to save your changes.
VLAN Access Lists Page
Use the VLAN Access Lists page to view and configure VLAN access lists for Cisco Catalyst switches
and Cisco 7600 Series routers.
Navigation Path
You can access this page from:
• (Device view) Select Platform > VLAN Access Lists from the Device Policy selector.
• (Device view) Select Catalyst Platform >VLAN Access Lists from the Policy Types selector.