Filter
Top Products
70-16
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 70 Using Image Manager
Working with Devices
Note If a particular device is part of a cluster, you can navigate through the cluster to view device
storage details.
Tip The device may have more than one storage area, for example, disk1. Be sure to scroll down to
see secondary (flash) storage capacity.
Step 4 Note the available disk space on the device.
Step 5 To remove one or more images from the device to free up space, select one or more images in the Storage
Tab and click Delete at the top of the Storage Tab.
Tip Alternatively, you can select one or more images, right-click and click Delete.
Tip If you delete an image that is currently active and is being referenced, Image Manager displays
a warning message.
Step 6 To download an image from the device, select the image and click Download at the top of the Storage
tab. Select the location on the local file system to which to download the image and click OK.
Note For a cluster device, download of images is only supported on the Cluster master. Similarly, for
a failover device, download of images is only supported on the active device in the pair.
A dialog appears showing the progress of the download from the device. After the download is
completed, the downloaded image is shown in Explorer.
Step 7 Select the Compatible Images tab in the lower pane.
The system displays images that are compatible to the device.
Step 8 To install the compatible image(s) onto the device do the following:
a. Select the image to be added to the device.
b. Double-click the download icon.
The image is downloaded to the repository.
c. Select the image and then select Install from the context menu.
The Install wizard appears and the system installs the image. Please see Install Compatible Images
on Devices, page 70-28 for details.
View Device Memory
You can use Image Manager to determine the memory capacity and application of a device in your
network.