Filter
Top Products
47-14
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 47 Configuring Device Administration Policies on Firewall Devices
Configuring Device Credentials
Field Reference
Table 47-8 Credentials Page
Element Description
Username Enter a user name for logging into the device. The name must be at least
four characters; the maximum is 64 characters. Entries are
case-sensitive.
Password
Confirm
Provide a password for logging into the device (EXEC mode) with the
specified Username. This password must be at least three characters;
the maximum is 32 characters. Entries are case-sensitive.
Re-enter the user password in the Confirm field.
Note We recommend a password length of at least 8 characters.
Privilege Level Choose a privilege level for this user; available values are 1 through 15.
Level 1 allows EXEC-mode access only, the default level for log-in;
level 15 allows Privileged EXEC-mode access; that is, access to the
Enable mode. Other levels must be explicitly defined on the device.
Enable Password
Confirm
You can specify an Enable password that lets this user access Privileged
EXEC mode after logging in. This password must be at least three
characters; the maximum is 32 characters. Entries are case-sensitive.
Re-enter the Enable password in the Confirm field.
Note If you configure user authentication for Enable access, each
user has their own password and this password is not used. See
Configuring AAA - Authentication Tab, page 47-5 for more
information.
Telnet/SSH Password
Confirm
You can specify a password that provides access to EXEC mode when
connecting to the device via a Telnet or SSH session. This password
must be at least three characters; the maximum is 32 characters. Entries
are case-sensitive.
Re-enter the Telnet/SSH password in the Confirm field.
Note If you configure user authentication for Telnet or SSH access,
each user has their own password and this password is not used.
See Configuring AAA - Authentication Tab, page 47-5 for
more information.