Filter
Top Products
65-9
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
Interfaces
Create and Edit Interface Dialog Boxes—Access Port Mode
Use the Create Interface dialog box (or the Edit Interface dialog box) to configure the attributes of
physical and virtual interfaces that run in access port mode.
Navigation Path
Go to the Interfaces/VLANs Page—Interfaces Tab, page 65-7, click Add or Edit to open the Create/Edit
Interface dialog box, then select Access Port from the Mode list.
Related Topics
• Create and Edit Interface Dialog Boxes—Routed Port Mode, page 65-12
• Create and Edit Interface Dialog Boxes—Trunk Port Mode, page 65-14
• Create and Edit Interface Dialog Boxes—Dynamic Mode, page 65-18
• Interface Auto Name Generator Dialog Box, page 59-12
• Understanding FlexConfig Policies and Policy Objects, page 7-2
• Understanding Interface Role Objects, page 6-67
Field Reference
Table 65-4 Create and Edit Interface Dialog Boxes—Access Port Mode
Element Description
Enable Interface When selected, enables the interface.
When deselected, disables the interface using the shutdown command.
Type Specifies whether the definitions apply to an interface or a subinterface.
For details about defining a subinterface, see Create and Edit Interface
Dialog Boxes—Subinterfaces, page 65-22.
Name (Select button) Displays the generated interface name, if the name has been set.
Click Select to open the Interface Auto Name Generator Dialog Box,
page 59-12. From here, you can enter or edit the details that Security
Manager uses to generate an interface name.
Mode The port configuration type for this interface.
Select Access Port to display the configuration options that are relevant
for access ports.