Filter
Top Products
60-62
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 60 Router Device Administration
VTY Policy Page
• VTY Policy Page, page 60-50
Field Reference
Table 60-27 Command Accounting Dialog Box—Line Access
Element Description
Privilege Level The privilege level for which you want to define a command accounting
list. Valid values range from 0 to 15.
Note If you do not define a value, level 1 is assigned by default. This
value does not appear in the device configuration.
AAA Policy Default List Select this option to apply the default accounting list defined in the
device’s AAA policy to the EXEC commands executed for this
privilege level.
Custom Method List Select this option to define an accounting method list for this privilege
level.
Generate Accounting
Records for
Applies only when Custom Method List is selected.
Defines when the device sends an accounting notice to the accounting
server:
• Start and Stop—Generates accounting records at the beginning and
the end of the user process. The user process begins regardless of
whether the accounting server receives the “start” accounting
record. This is the default.
• Stop Only—Generates an accounting record at the end of the user
process only.
• None—No accounting records are generated.
Prioritized Method List Applies only when the Custom Method List option is selected.
Defines a sequential list of accounting methods to be used when
creating accounting records for a user. Enter the names of one or more
AAA server group objects (up to four), or click Select to select them.
Use the up and down arrows in the object selector to define the order in
which the selected server groups should be used. If the object that you
want is not listed, click the Create button to create it.
The device tries initially to perform accounting using the first method
in the list. If that method fails to respond, the device tries the next
method, and so on, until a response is received.
Note If you select None as a method, it must appear as the last
method in the list.
Enable Broadcast to Multiple
Servers
Applies only when Custom Method List is selected.
When selected, enables the sending of accounting records to multiple
AAA servers. Accounting records are sent simultaneously to the first
server in each AAA server group defined in the method list. If the first
server is unavailable, failover occurs using the backup servers defined
within that group.
When deselected, accounting records are sent only to the first server in
the first AAA server group defined in the method list.