Filter
Top Products
23-17
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 23 Configuring Network Address Translation
NAT Policies on Security Devices
Configuring NAT on PIX, FWSM, and pre-8.3 ASA Devices
The following sections describe configuring network address translation on PIX and FWSM devices, and
on pre-8.3-version ASAs. (See Configuring NAT on ASA 8.3+ Devices, page 23-32 for information
about configuring NAT on ASA 8.3+ devices.)
• Address Pools, page 23-17
• Translation Rules: PIX, FWSM, and pre-8.3 ASA, page 23-18
–
Translation Exemptions (NAT 0 ACL), page 23-19
–
Dynamic Rules Tab, page 23-21
–
Policy Dynamic Rules Tab, page 23-23
–
Static Rules Tab, page 23-25
–
General Tab, page 23-30
Address Pools
Use the Address Pools page to view and manage the global address pools used in dynamic NAT rules.
The Address Pool dialog box is used to add and edit these address pools. Refer to Address Pool Dialog
Box, page 23-17 for descriptions of the fields displayed in the Global Address Pools table on this page.
Navigation Path
• (Device view) Select NAT > Address Pools from the Device Policy selector.
• (Policy view) Select NAT (PIX/ASA/FWSM) > Address Pools from the Policy Type selector.
Select an existing policy from the Shared Policy selector, or right-click Address Pools to create a
new policy.
Related Topics
• Configuring NAT on PIX, FWSM, and pre-8.3 ASA Devices, page 23-17
Address Pool Dialog Box
Use the Address Pool dialog box to add or edit a global address pool for use in dynamic NAT rules.
Navigation Path
You open the Address Pool dialog box by clicking the Add Row or Edit Row buttons on the Address
Pools, page 23-17.
Related Topics
• Configuring NAT on PIX, FWSM, and pre-8.3 ASA Devices, page 23-17
Field Reference
Table 23-6 Address Pools Dialog Box
Element Description
Interface Name Enter or Select the name of the device interface on which the mapped
IP addresses will be used.