Filter
Top Products
54-16
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPF
Navigation Path
You can access the Filtering tab from the OSPF page. For more information about the OSPF page, see
Configuring OSPF, page 54-2.
Related Topics
• Add/Edit Filtering Dialog Box, page 54-16
Field Reference
Add/Edit Filtering Dialog Box
Use the Add/Edit Filtering dialog box to add new filters to the Filter table or to modify an existing filter.
Navigation Path
You can access the Add/Edit Filtering dialog box from the Filtering Tab, page 54-15.
Related Topics
• Configuring OSPF, page 54-2
Field Reference
Table 54-14 Filtering Tab
Element Description
OSPF Process The OSPF process associated with the filter entry.
Area ID The ID of the area associated with the filter entry.
Prefix List Name The name of the prefix list.
Filtered Network The IP address and mask of the network being filtered.
Traffic Direction Displays “Inbound” if the filter entry applies to LSAs coming in to an
OSPF area or “Outbound” if it applies to LSAs going out of an OSPF
area.
Sequence # The sequence number for the filter entry. When multiple filters apply to
an LSA, the filter with the lowest sequence number is used.
Action Displays “Permit” if LSAs matching the filter are allowed or “Deny” if
LSAs matching the filter are denied.
Lower Range The minimum prefix length to be matched.
Upper Range The maximum prefix length to be matched.
Table 54-15 Add/Edit Filtering Dialog Box
Element Description
OSPF Process Select the OSPF process associated with the filter entry.
Area ID Select the ID of the area associated with the filter entry.
Prefix List Name Enter the prefix name.
Filtered Network Enter the IP address and mask of the network being filtered.