Filter
Top Products
62-13
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 62 Configuring Logging Policies
NetFlow Policy Page
Field Reference
Table 62-5 NetFlow Page
Element Description
Setup tab
Primary Destination
Redundant Destination
The primary and secondary NetFlow collector. You must select a
primary collector to enable NetFlow data collection on this device. To
disable transmission of NetFlow data to either of these collectors,
choose the blank entry from the drop-down list.
Select whether to identify the NetFlow collector using its IP address or
host name, then configure the required fields for each option:
• IP Address—Enter the IP address of the device hosting the
primary NetFlow Collection Engine. You can also specify a
network/host object that specifies the IP address, or click Select to
select the object from a list or to create a new one.
In the UDP Port field, enter the port number monitored by the flow
collector (port numbers can range from 1 to 65535). You can enter
a number or the name of a port list object, or click Select to select
an object from a list or to create a new one.
• Hostname—Enter the fully qualified domain name of the device
hosting the primary NetFlow Collection Engine. You also must
specify the UDP port as you do when specifying the IP address.
Source Interface The router interface through which flow data will be transmitted to the
collector destinations. Enter an interface or interface role name, or click
Select to select an object from a list or to create a new one.