Filter
Top Products
64-31
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 64 Configuring Routing Policies
OSPF Interface Policy Page
OSPF Interface Dialog Box
Use the OSPF Interface dialog box to add or edit the properties of OSPF interfaces.
Navigation Path
Go to the OSPF Interface Policy Page, page 64-30, then click the Add or Edit button beneath the table.
Related Topics
• Defining OSPF Interface Settings, page 64-25
• OSPF Routing on Cisco IOS Routers, page 64-19
• Basic Interface Settings on Cisco IOS Routers, page 59-1
• Understanding Interface Role Objects, page 6-67
Cost The cost of sending packets over the selected interface, if this value is
different from the cost as normally calculated.
Priority The priority of the selected interface.
MTU Ignore Indicates whether Maximum Transmission Rate (MTU) detection is
disabled on the selected interface.
Database Filter Indicates whether link-state advertisement (LSA) flooding is disabled
on the selected interface.
Hello Interval The interval between hello packets (in seconds) sent over this interface.
Transmit Delay The amount of time OSPF waits (in seconds) before flooding an LSA
over the link.
Retransmit Interval The interval between LSA retransmissions (in seconds) over the
selected interface.
Dead Interval The interval OSPF waits (in seconds) before declaring a neighboring
router dead because of an absence of hello packets.
Network Type The network type configured for the selected interface, if it differs from
the default medium.
Add button Opens the OSPF Interface Dialog Box, page 64-31. From here you can
define the properties of an OSPF interface.
Edit button Opens the OSPF Interface Dialog Box, page 64-31. From here you can
edit the properties of the selected OSPF interface.
Delete button Deletes the selected OSPF interface definitions from the table.
Table 64-11 OSPF Interface Page (Continued)
Element Description