Filter
Top Products
59-56
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
PVC Policy Page
• WIC-1-SHDSL-V3—A 1-port multiline G.SHDSL WAN interface card with support for 2-wire
mode and 4-wire mode (standard & enhanced).
• NM-1A-T3—A 1-port ATM network module with a T3 link.
• NM-1A-OC3-POM—A 1-port ATM network module with an optical carrier level 3 (OC-3) link and
three operating modes (multimode, single-mode intermediate reach (SMIR), and single-mode
long-reach (SMLR)).
• NM-1A-E3—A 1-port ATM network module with an E3 link.
• 857 ADSL—Cisco 857 Integrated Service Router with an ADSL interface.
• 876 ADSL—Cisco 876 Integrated Services Router with an ADSL interface.
• 877 ADSL—Cisco 877 Integrated Services Router with an ADSL interface.
• 878 888 G.SHDSL—Cisco 878 Integrated Services Router with a G.SHDSL interface.
• 1801 ADSLoPOTS—Cisco 1801 Integrated Services Router that provides ADSL over POTS.
• 1802 ADSLoISDN—Cisco 1802 Integrated Services Router that provides ADSL over ISDN.
• 1803 G.SHDSL—Cisco 1803 Integrated Services Router that provides 4-wire G.SHDSL.
Navigation Path
Go to the PVC Policy Page, page 59-54, then click the Add or Edit button beneath the table.
Related Topics
• Defining ATM PVCs, page 59-50
Field Reference
Table 59-22 PVC Dialog Box
Element Description
ATM Interface The ATM interface on which the PVC is defined. Enter the name of an
interface, subinterface, or interface role, or click Select to select it. If
the object that you want is not listed, click the Create button to create
it.
Note We strongly recommend not defining an interface role that
includes ATM interfaces from different interface cards. The
different settings supported by each card type may cause
deployment to fail.
Interface Card The type of WAN interface card installed on the router or the router
type. Supported card types are listed above.
Note To ensure proper policy validation, we highly recommend that
you define a value in this field. When you discover a live
device, the correct interface card type will already be displayed.
If you did not perform discovery on a live device, or if Security
Manager cannot detect the type of interface card installed on
the device, this field displays “Unknown”.
Settings tab Defines basic PVC settings, such as the VPI/VCI and encapsulation.
See PVC Dialog Box—Settings Tab, page 59-57.
QoS tab Defines ATM traffic shaping and other quality-of-service settings for
the PVC. See PVC Dialog Box—QoS Tab, page 59-60.