Filter
Top Products
65-38
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
VLAN ACLs (VACLs)
Related Topics
• Deleting VACLs, page 65-39
• Creating or Editing VLANs, page 65-26
• Creating or Editing VLAN Groups, page 65-32
• Create and Edit VLAN ACL Dialog Boxes, page 65-41
• VLAN Access Lists Page, page 65-39
Step 1 Do one of the following:
• (Device view) Select a Catalyst device, then select Platform > VLAN Access Lists from the Policy
selector.
• (Policy view) Select Catalyst Platform > VLAN Access Lists.
The VLAN Access Lists page is displayed. For a description of the fields on this page, see VLAN Access
Lists Page, page 65-39.
Step 2 Do one of the following:
• To define the attributes of a new VACL, click Add Row.
• To edit the attributes of a VACL, select it in the list, then click Edit Row.
A dialog box opens. See Create and Edit VLAN ACL Dialog Boxes, page 65-41, for a description of the
fields in the dialog box.
Step 3 Enter a name for the VACL in the VLAN ACL Name field.
Step 4 In the VLANs field, specify the VLANs to which the VACL should be applied, or click Select to open a
VLAN selector.
Step 5 Define the sequence map:
a. Click Add Row or Edit Row beneath the Sequence Map table. A dialog box opens. See Create and
Edit VLAN ACL Content Dialog Boxes, page 65-42.
b. Enter a number to identify the sequence.
c. Specify the standard and extended ACLs to assign to the sequence, or click Select to select the ACL
object from a list or to create a new ACL object. For more information about ACL objects, see
Creating Access Control List Objects, page 6-49.
d. Specify the action to perform on traffic that matches the ACLs defined in this sequence. (When you
select Redirect as the action, you must specify the physical destination interfaces, or click Select to
display a selector. See Specifying Interfaces During Policy Definition, page 6-70.)
e. Click OK to save your definitions locally on the client and close the dialog box. The sequence is
displayed in the Sequence Map table.
f. Repeat the process to add sequences to the sequence map.
g. Use the up and down arrows to reorder the sequences, if required.