Filter
Top Products
54-47
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring RIP
Add/Edit Filter Dialog Box
Use the Add Filter and Edit Filter dialog boxes to add and edit RIP filters on the RIP - Filtering Tab,
page 54-46. Filters are used to limit network information in incoming and outgoing RIP advertisements.
Except for their titles, these two dialog boxes are identical.
Navigation Path
You can access the Add and Edit Filter dialog boxes from the Filtering tab on the RIP Page for PIX/ASA
7.2 and Later, page 54-42.
Field Reference
RIP - Interface Tab
Use the Interface panel to manage the interfaces configured to send and receive RIP broadcasts. See
Add/Edit Interface Dialog Box, page 54-48 for more information.
Navigation Path
You can access the Interface tab from the RIP Page for PIX/ASA 7.2 and Later, page 54-42.
Related Topics
• RIP - Setup Tab, page 54-43
• RIP - Redistribution Tab, page 54-45
• RIP - Filtering Tab, page 54-46
• Chapter 54, “Configuring Routing Policies on Firewall Devices”
Table 54-32 Add/Edit Filter Dialog Box
Element Description
Traffic Direction Choose the type of traffic to be filtered: Inbound or Outbound.
Note If Traffic Direction is Inbound, you can define an Interface
filter only.
Filter On Specify whether the filter is based on an Interface or a Route.
If you select Interface, enter or Select the name of the interface on
which routing updates are to be filtered.
If you select Route, choose the route type:
• Static – Only static routes are filtered.
• Connected – Only connected routes are filtered.
• OSPF – Only OSPF routes discovered by the specified OSPF
process are filtered. Enter the Process ID of the OSPF process to be
filtered.
Filter ACLs Enter or Select the name of one or more access control lists (ACLs) that
define the networks to be allowed or removed from RIP route
advertisements.