Filter
Top Products
59-37
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
ADSL Policy Page
Related Topics
• PVC Policy Page, page 59-54
• SHDSL Policy Page, page 59-41
• ADSL on Cisco IOS Routers, page 59-33
• Table Columns and Column Heading Features, page 1-46
• Filtering Tables, page 1-45
Field Reference
ADSL Settings Dialog Box
Use the ADSL Settings dialog box to configure ADSL settings on a selected ATM interface.
Note When you configure ADSL settings, we highly recommend that you select the type of device or interface
card on which the ATM interface is defined. ADSL settings are highly dependent on the hardware.
Defining the hardware type in Security Manager enables proper validation of your configuration for a
successful deployment to your devices.
Navigation Path
Go to the ADSL Policy Page, page 59-36, then click the Add or Edit button beneath the table.
Related Topics
• Defining ADSL Settings, page 59-35
• PVC Policy Page, page 59-54
Table 59-16 ADSL Page
Element Description
ATM Interface The ATM interface on which ADSL settings are defined.
Interface Card The type of device or ADSL interface card on which the ATM interface
resides.
Bandwidth Change Indicates whether the router makes dynamic adjustments to VC
bandwidth as overall bandwidth changes. (This is relevant only when
IMA groups are configured on the ATM interface.)
DSL Operating Mode The DSL operating mode for this interface.
Tone Low Indicates whether the interface is using the low tone set (carrier tones
29 through 48).
Add button Opens the ADSL Settings Dialog Box, page 59-37. From here you can
define the ADSL settings for a selected ATM interface.
Edit button Opens the ADSL Settings Dialog Box, page 59-37. From here you can
edit the selected ADSL definition.
Delete button Deletes the selected ADSL definition from the table.