Filter
Top Products
65-49
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
IDSM Settings
Create and Edit IDSM EtherChannel VLANs Dialog Boxes
Use the Create IDSM EtherChannel VLANs dialog box (or the Edit IDSM EtherChannel VLANs dialog
box) to configure or reconfigure the attributes of an IDSM EtherChannel VLAN.
Navigation Path
Go to the IDSM Settings Page, page 65-48, then click the Add or Edit button beneath the EtherChannel
VLANs table.
Related Topics
• Create and Edit IDSM Data Port VLANs Dialog Boxes, page 65-50
Module Slot-Data Port Identifies the IDSM service module data port by number (1 or 2) to
distinguish between the two ports.
Each IDSM service module (blade) has two data ports. You can
configure a data port individually or you can assign it to an
EtherChannel group. All data ports in a channel group are configured
at the group level
Mode Indicates whether the running mode is trunk (IPS) or capture (IDS).
Capture Enabled Indicates whether the specified channel group is configured as a capture
destination.
Allowed VLANs Lists which VLANs are allowed for the specified channel group.
Add Row button Opens the Create IDSM EtherChannel VLANs dialog box. From here
you can define which traffic is directed to the data ports in an
EtherChannel group and which sensing mode is used.
Edit Row button Opens the Edit IDSM EtherChannel VLANs dialog box. From here you
can modify the attributes of an EtherChannel VLAN definition.
Delete Row button Deletes the selected VLAN from the IDSM.
Data Port VLANs table
Module Slot-Data Port Identifies the IDSM service module data port by number (1 or 2), to
distinguish between the two ports.
Mode Indicates whether the running mode is trunk (IPS) or capture (IDS). To
change the mode, select and edit the relevant table row.
Capture Enabled Indicates whether the specified data port is configured as a capture
destination.
Allowed VLANs Lists which VLANs are allowed for the specified data port.
Add Row button Opens the Create IDSM Data Port VLANs dialog box. From here you
can define which traffic is directed to a specific data port and which
sensing mode is used.
Edit Row button Opens the Edit IDSM Data Port VLANs dialog box. From here you can
modify the attributes of a data port VLAN definition.
Delete Row button Deletes the selected VLAN from the IDSM.
Table 65-22 IDSM Settings Page (Continued)
Element Description