Filter
Top Products
64-13
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 64 Configuring Routing Policies
EIGRP Routing Policy Page
Step 2 On the EIGRP Redistribution tab, select a row from the EIGRP Redistribution Mappings table, then click
Edit, or click Add to create a mapping. The EIGRP Redistribution Mapping dialog box appears. See
Table 64-10 on page 64-18 for a description of the fields in this dialog box.
Step 3 Select an existing EIGRP AS from the displayed list.
Step 4 Select the protocol whose routes you want to redistribute into the selected EIGRP AS.
Note You can create a single mapping for each static route, RIP route, BGP AS, EIGRP AS, and OSPF
process.
Step 5 (Optional) Under Metrics, modify the default metric (cost) of the redistributed routes by entering values
in the fields used to calculate the metric. The metric determines the priority of the routes.
Note Entering a metric is optional, but if you do specify a value, you must enter values for all five
parameters. You need not define metric values when redistributing one EIGRP process into
another.
Step 6 Click OK to save your definitions locally on the client and close the dialog box. The redistribution
mapping appears in the Redistribution Mapping table in the EIGRP Redistribution tab.
EIGRP Routing Policy Page
Enhanced Interior Gateway Routing Protocol (EIGRP) is a scalable interior gateway protocol that
provides extremely quick convergence times with minimal network traffic.
You can configure EIGRP routing policies from the following tabs on the EIGRP Routing page:
• EIGRP Page—Setup Tab, page 64-13
• EIGRP Page—Interfaces Tab, page 64-15
• EIGRP Page—Redistribution Tab, page 64-17
For more information, see EIGRP Routing on Cisco IOS Routers, page 64-8.
Navigation Path
• (Device view) Select Platform > Routing > EIGRP from the Policy selector.
• (Policy view) Select Router Platform > Routing > EIGRP from the Policy Type selector.
Right-click EIGRP to create a policy, or select an existing policy from the Shared Policy selector.
EIGRP Page—Setup Tab
Use the EIGRP Setup tab to view, create, edit, and delete EIGRP routes.
Navigation Path
Go to the EIGRP Routing Policy Page, page 64-13, then click the Setup tab.