Filter
Top Products
59-65
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
PVC Policy Page
Field Reference
PVC Advanced Settings Dialog Box
Use the PVC Advanced Settings dialog box to configure F5 Operation, Administration, and Maintenance
(OAM) functionality on an ATM PVC. OAM is used to detect connectivity failures at the ATM layer.
For more information, see Defining OAM Management on ATM PVCs, page 59-53.
Navigation Path
Go to the PVC Dialog Box, page 59-55, then click Advanced.
Related Topics
• PVC Policy Page, page 59-54
Field Reference
Table 59-26 Define Mapping Dialog Box
Element Description
IP Options The type of IP protocol mapping to use:
• IP Address—Select this option when using static mapping. Enter
the address or the name of a network/host object, or click Select to
select it. If the object that you want is not listed, click the Create
button to create it.
• InARP—Inverse ARP. Select this option when using dynamic
mapping. This allows the PVC to resolve its own network
addresses without configuring a static map. Dynamic mappings age
out and are refreshed periodically every 15 minutes by default.
Note InARP can be used only when aal5snap is the defined
encapsulation type for the PVC. See PVC Dialog
Box—Settings Tab, page 59-57.
Broadcast Options Indicates whether to use this map entry when sending IP broadcast
packets (such as EIGRP updates):
• Broadcast—The map entry is used for broadcast packets.
• No Broadcast—The map entry is used only for unicast packets.
• None—Broadcast options are disabled.
Table 59-27 PVC Advanced Settings Dialog Box
Element Description
OAM tab Defines loopback, connectivity check, and AIS/RDI settings. See PVC
Advanced Settings Dialog Box—OAM Tab, page 59-66.
OAM-PVC tab Enables OAM loopbacks and connectivity checks on the PVC. See PVC
Advanced Settings Dialog Box—OAM-PVC Tab, page 59-68.