Filter
Top Products
59-42
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
SHDSL Policy Page
• (Policy view) Select Router Interfaces > Settings > DSL > SHDSL from the Policy Type selector.
Right-click SHDSL to create a policy, or select an existing policy from the Shared Policy selector.
Related Topics
• PVC Policy Page, page 59-54
• ADSL Policy Page, page 59-36
• SHDSL on Cisco IOS Routers, page 59-40
• Table Columns and Column Heading Features, page 1-46
• Filtering Tables, page 1-45
Field Reference
SHDSL Controller Dialog Box
Use the SHDSL Controller dialog box to configure SHDSL controllers.
Navigation Path
Go to the SHDSL Policy Page, page 59-41, then click the Add or Edit button beneath the table.
Related Topics
• Defining SHDSL Controllers, page 59-40
• PVC Policy Page, page 59-54
Table 59-18 SHDSL Page
Element Description
Name The name of the DSL controller.
Description An optional description of the controller.
Shutdown Indicates whether the DSL controller is in shutdown mode.
Configure ATM Mode Indicates whether the DSL controller has been set into ATM mode.
Line Termination The line termination set for the router (CPE or CO).
DSL Mode The operating mode defined for the DSL controller.
Line Mode The line mode defined for the DSL controller.
Line Rate The line rate (in kbps) defined for the DSL controller.
Note A value is displayed in this column only if the line mode is not
set to Auto.
SNR Margin Current The current signal-to-noise ratio on the controller.
SNR Margin Snext The self near-end crosstalk (Snext) signal-to-noise ratio on the
controller.
Add button Opens the SHDSL Controller Dialog Box, page 59-42. From here you
can define the settings for a DSL controller.
Edit button Opens the SHDSL Controller Dialog Box, page 59-42. From here you
can edit the selected DSL controller definition.
Delete button Deletes the selected DSL controller definition from the table.