Filter
Top Products
64-17
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 64 Configuring Routing Policies
EIGRP Routing Policy Page
EIGRP Page—Redistribution Tab
Use the EIGRP Redistribution tab to create, edit, and delete EIGRP redistribution mappings.
Navigation Path
Go to the EIGRP Routing Policy Page, page 64-13, then click the Redistribution tab.
Related Topics
• Redistributing Routes into EIGRP, page 64-12
• EIGRP Page—Setup Tab, page 64-13
• EIGRP Page—Interfaces Tab, page 64-15
• Table Columns and Column Heading Features, page 1-46
• Filtering Tables, page 1-45
Field Reference
Split Horizon When selected, the split horizon feature is used to prevent routing
loops.
When deselected, split horizon is disabled. When split horizon is
disabled, the router can advertise a route out of the same interface
through which it learned the route.
Disabling split horizon is often useful when dealing with nonbroadcast
networks, such as Frame Relay and SMDS.
Note Changing the split horizon setting on an interface resets all
adjacencies with EIGRP neighbors that are reachable over that
interface.
Table 64-8 EIGRP Interface Dialog Box (Continued)
Element Description
Table 64-9 EIGRP Redistribution Tab
Element Description
EIGRP AS Number The area ID of the EIGRP route into which other routes are being
redistributed.
Protocol The protocol that is being redistributed.
AS/Process ID The AS number or process ID of the route being redistributed.
Bandwidth The minimum bandwidth of the path for the EIGRP route, as defined
for the route metric.
Delay The mean latency of the path, as defined for the route metric.
Reliability A value representing the estimated reliability of the path, as defined for
the route metric.
Effective Bandwidth A value representing the effective load on the link, as defined for the
route metric.
MTU The minimum MTU of the path, as defined for the route metric.