Filter
Top Products
31-27
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 31 Managing Dynamic Access Policies for Remote Access VPNs (ASA 8.0+ Devices)
Dynamic Access Page (ASA)
Note Duplicate entries are not allowed. If you configure a dynamic access policy with no AAA or endpoint
attributes, the security appliance always selects it since all selection criteria are satisfied.
Navigation Path
Open the Add/Edit Dynamic Access Policy Dialog Box, page 31-12 with the Main tab selected, then
click Create, or select a dynamic access policy in the table and click Edit. The Add/Edit DAP Entry
dialog box is displayed. Select AnyConnect Identity as the Criterion.
Related Topics
• Understanding DAP Attributes, page 31-3
• Configuring DAP Attributes, page 31-7
• Configuring Dynamic Access Policies, page 31-2
Field Reference
Add/Edit DAP Entry Dialog Box > Application
Use this dialog box to indicate the type of remote access connection as the endpoint attribute for the
dynamic access policy.
Note Duplicate entries are not allowed. If you configure a dynamic access policy with no AAA or endpoint
attributes, the security appliance always selects it since all selection criteria are satisfied.
Table 31-11 Add/Edit DAP Entry Dialog Box > AnyConnect Identity
Element Description
Criterion Shows AnyConnect Identity as the selection criterion.
Client Version Select the check box, select the matching criteria (for example, is) from
the drop-down list, and enter the AnyConnect Client version number.
Platform Select the check box, select the matching criteria (for example, is) from
the drop-down list, and select the appropriate platform from the
drop-down list.
Platform Version Select the check box, select the matching criteria (for example, is) from
the drop-down list, and enter the appropriate version number of the
platform.
Device Type Select the check box, select the matching criteria (for example, is) from
the drop-down list, and select the appropriate device type from the
drop-down list.
Device Unique ID Select the check box, select the matching criteria (for example, is) from
the drop-down list, and enter the unique device ID. This ID
distinguishes the device allowing you to set policies exclusive to that
device.