Filter
Top Products
64-18
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 64 Configuring Routing Policies
EIGRP Routing Policy Page
EIGRP Redistribution Mapping Dialog Box
Use the EIGRP Redistribution Mapping dialog box to add or edit the properties of an EIGRP
redistribution mapping.
Navigation Path
Go to the EIGRP Page—Redistribution Tab, page 64-17, then click the Add or Edit button beneath the
table.
Note You must create at least one EIGRP AS before you can access the EIGRP Redistribution dialog box. See
EIGRP Page—Setup Tab, page 64-13.
Related Topics
• Redistributing Routes into EIGRP, page 64-12
Field Reference
Match When redistributing an OSPF process, indicates the types of OSPF
routes that are being redistributed.
Add button Opens the EIGRP Redistribution Mapping Dialog Box, page 64-18.
From here you can define EIGRP redistribution mappings.
Edit button Opens the EIGRP Redistribution Mapping Dialog Box, page 64-18.
From here you can edit the selected EIGRP redistribution mapping.
Delete button Deletes the selected EIGRP redistribution mappings from the table.
Table 64-9 EIGRP Redistribution Tab (Continued)
Element Description
Table 64-10 EIGRP Redistribution Mapping Dialog Box
Element Description
EIGRP AS Numbers The EIGRP AS into which other routes are being redistributed. You
must select an ID number from the list of EIGRP autonomous systems
defined in the EIGRP Page—Setup Tab, page 64-13.
Protocol to Redistribute The routing protocol that is being redistributed:
• Static—Redistributes static routes. You can define a single
mapping for each route.
• EIGRP—Redistributes an EIGRP autonomous system. Enter the
AS number in the displayed field. You can define a single mapping
for each AS.
• BGP—Redistributes a BGP autonomous system. You can define a
single BGP mapping on each device. If you configured a BGP AS
in the BGP Setup tab, the AS number is displayed. Otherwise, a
message is displayed indicating that no BGP AS was defined. See
BGP Page—Redistribution Tab, page 64-6.