Cisco Systems CL-28826-01 Security Camera User Manual


  Open as PDF
of 2616
 
65-12
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
Interfaces
Create and Edit Interface Dialog Boxes—Routed Port Mode
Use the Create Interface dialog box (or the Edit Interface dialog box) to configure the attributes of
physical interfaces that run in routed port mode on Layer 3.
Navigation Path
Go to the Interfaces/VLANs Page—Interfaces Tab, page 65-7, click Add or Edit to open the Create/Edit
Interface dialog box, then select Routed Port from the Mode list.
Related Topics
Create and Edit Interface Dialog Boxes—Access Port Mode, page 65-9
Create and Edit Interface Dialog Boxes—Trunk Port Mode, page 65-14
Create and Edit Interface Dialog Boxes—Dynamic Mode, page 65-18
Understanding Interface Role Objects, page 6-67
Selecting Objects for Policies, page 6-2
Understanding Networks/Hosts Objects, page 6-74
Field Reference
Flow Control Send The flow control setting for outgoing frames:
Off—The port does not send flow control frames to the
neighboring port.
On—The port sends flow control frames to the neighboring port.
Desired—The port allows, but does not require, flow control
frames.
Roles Lists the interface roles associated with the interface. Interface roles are
objects that are replaced with the actual interface IP addresses when the
configuration is generated for each device. They allow you to define
generic rules—ones that can apply to multiple interfaces. See
Understanding Interface Role Objects, page 6-67.
Table 65-4 Create and Edit Interface Dialog Boxes—Access Port Mode (Continued)
Element Description
Table 65-5 Create and Edit Interface Dialog Boxes—Routed Port Mode
Element Description
Enable Interface When selected, enables the interface.
When deselected, disables the interface using the shutdown command.
Type Specifies whether the definitions apply to an interface or a subinterface.
For details about defining a subinterface, see Create and Edit Interface
Dialog Boxes—Subinterfaces, page 65-22.