Filter
Top Products
23-22
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 23 Configuring Network Address Translation
NAT Policies on Security Devices
• Translation Rules: PIX, FWSM, and pre-8.3 ASA, page 23-18
• Advanced NAT Options Dialog Box, page 23-28
• Select Address Pool Dialog Box, page 23-22
Field Reference
Select Address Pool Dialog Box
The Select Address Pool dialog box presents a list of global address pools; these pools are defined and
managed via the Address Pools, page 23-17. Use this dialog box to select an address pool for use by a
dynamic translation rule, or a policy dynamic translation rule.
Navigation Path
You can access the Select Address Pool dialog box from the Add/Edit Dynamic Translation Rule Dialog
Box, page 23-21 when adding or editing a dynamic translation rule, or from the Add/Edit Policy
Dynamic Rules Dialog Box, page 23-24 when adding or editing a policy dynamic translation rule.
Related Topics
• Configuring NAT on PIX, FWSM, and pre-8.3 ASA Devices, page 23-17
• Translation Rules: PIX, FWSM, and pre-8.3 ASA, page 23-18
• Address Pools, page 23-17
Field Reference
Table 23-8 Add/Edit Dynamic Translation Rule Dialog Box
Element Description
Enable Rule If checked, the rule is enabled. Deselect this option to disable the rule
without deleting it.
Original: Interface Enter the name or Select the device interface to which the rule applies.
Original: Address Enter IP addresses for (or Select) the source hosts and network objects
to which the rule applies. Multiple entries must be separated by
commas.
Translated: Pool Enter (or Select) the ID number of the pool of addresses used for
translation; clicking Select opens the Select Address Pool Dialog Box,
page 23-22.
Enter a value of zero to specify this as an identity NAT rule.
Translated: Direction The rule can be applied to Inbound or Outbound traffic, as specified
with this option.
Advanced button Click to open the Advanced NAT Options Dialog Box, page 23-28 to
configure advanced settings for this rule.
Table 23-9 Select Address Pool Dialog Box
Element Description
Pool ID The identification number of the address pool.
Interface The name of the device interface to which the address pool applies.