Filter
Top Products
54-33
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPFv3
Field Reference
Table 54-25 Add/Edit Redistribution Dialog Box
Element Description
Source Protocol Choose the source protocol for route redistribution:
• Connected – Redistributes connected routes (routes established
automatically by virtue of having an IP address enabled on the
interface) to the OSPFv3 routing process. Connected routes are
redistributed as external to the autonomous system.
• OSPF – Redistributes routes from another OSPF routing process.
The Routing PID and the Match options are enabled when you
choose this option.
• Static – Redistributes static routes to the OSPFv3 routing process.
Metric The metric value for the routes being redistributed. Valid values range
from 1 to 16777214; the default is 20.
When redistributing from one OSPF process to another OSPF process
on the same device, the metric will be carried through from one process
to the other if no metric value is specified.
Metric Type The metric type is the external link type associated with the default
route that is advertised into the OSPFv3 routing domain.
Choose None, 1, or 2, where None indicates there is no default route, 1
indicates the metric is a Type 1 external route, and 2 is a Type 2 external
route.
Tag (optional) The tag is a 32-bit decimal value attached to each external route. This
is not used by OSPF itself. It may be used to communicate information
between other border devices. Valid values range from 0 to
4294967295.
Route Map The name of the route map to apply to the redistribution entry.
Note This field contains only the Route Map name. The Route Map
is created and contained within a FlexConfig; see Chapter 7,
“Managing FlexConfigs” for more information.
Routing PID The ID of the process to which redistribution is directed. (The Process
ID is defined on the Process Tab, page 54-24.)
This option is enabled only when OSPF is chosen as the Source
Protocol.
Include Connected Check this box to include connected routes in the redistribution.
Match
The conditions used for redistributing routes from one routing protocol to another. The routes must
match the selected condition to be redistributed. You can choose one or more of the following match
conditions. These options are enabled only when OSPF is chosen as the Source Protocol.
Internal The route is internal to a specific autonomous system.
External 1 Routes that are external to the autonomous system, but are imported
into OSPF as Type 1 external routes.
External 2 Routes that are external to the autonomous system, but are imported
into OSPF as Type 2 external routes.